![3D Robotics Aero Скачать руководство пользователя страница 22](http://html1.mh-extra.com/html/3d-robotics/aero/aero_instruction-manual_441989022.webp)
22
Preflight steps
Select an open area for flying, away from people and buildings,
and remember to bring the flight checklist and a fully charged
battery. Follow these steps every time you fly.
1
Before flying, examine the Aero to ensure that all
components are secured in flight configuration.
Flight Checklist
Preflight
LED
Inactive, safe to handle
Safety Button
Active, press and hold button before handling
Initializing, please wait
System error, see troubleshooting guide
Autopilot ready, no GPS
Loss of RC signal, automatic return to launch
Autopilot ready, GPS locked
Armed, ready to fly
6
Press and hold
safety button until
solid red.
5
Check LED for blinking
blue (no GPS) or blinking
green (GPS locked).
GPS
GPS
X
Check manual
controls.
3
»
Throttle
»
Pitch up and down
»
Roll left and right
»
Yaw left and right
4
Check autopilot
stabilization.
»
Pitch up and down
»
Roll left and right
»
Wings and tail attached
»
Tail boom secure
»
Servos and rods secure
»
Airspeed sensor secure
»
Propeller tight
»
Transmitter on
1
Go outside to an open area,
and inspect aircraft.
Connect
charged battery.
2
»
Hold aircraft still
while powering on.
»
Secure lid.
»
Check for balanced
center of gravity.
tail servos
wing servos
»
Check that the wings, tail, and tail boom are fully
assembled and securely attached.
»
Check that the propeller is secured tightly to the
motor.
»
Check that the servo rods are secured to the servo
horns with the blue clasps.
flight checklist