3D perception
C
OMPACT
V
IEW
SX25+
Revision 3
User Manual
28
16.6
Control Sub-menu
mode
Selects between RS232, RIMI (internal) and LAN
control modes. The projector can be controlled by
only one of the modes at a time.
When using the CompactView SX25+I the mode must
be set to RIMI (Rich Media Interface). When a GCM
has been installed, the projector will detect its
presence after a power cycle and select RIMI.
Note: Reset to factory default will automatically
reset to RS232.
RS232 address
For use when daisy-chaining several units. Select
auto or fixed address. Only one address scheme is
allowed per daisy-chain. The auto address is
allocated following the relative position in the daisy-
chain. The fixed address is an absolute address. Only
unique fixed addresses are allowed.
RS232 fixed
Select a unique fixed address in the range available.
baudrate
Selects between baud rates 4800, 9600 and 19200. A
lower baud rate may be required in installations with
long cable runs.
FOR ALL
