Setting up Your Printer
4
Setting up Your Printer
WARNING!
Your printer weighs approximately 28 kg (62 lbs) with consumables.
Be sure to have help when lifting and moving it.
Do not plug in the printer until you are told to do so.
We strongly suggest that you save the packaging materials in case
you ever need to move or ship the printer.
Shipment Contents
#
Printer (with four toner cartridges and an OPC drum cartridge installed)
#
Waste toner bottle
#
Output tray support
#
Media support for Tray 1
#
Power cord
#
Utilities and Documentation
CD-ROM
#
Installation Guide
Interface cables are not included in the shipment. If you need cables, con-
tact your local vendor or computer store
.
Unpacking the Printer
Use the following instructions to unpack your printer.
1
Remove the protective plastic cover.
2
With another person’s help, lift the printer from the
carton. Do not tilt the printer in any direction at any
time.
For best output quality and longest consumables
life, place the printer on a hard, flat, level, stable
surface capable of supporting about 37 kg (81 lbs).
3
Remove the tape and packing materials from the outside of the printer.
Remove the cardboard from Tray 1(the multipurpose tray).
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
