TD_UserManual_FPW_EN
Rev. 1.0 / 16.03.2022
Page 2 / 2
For each of the 3 FPW-pedals, one specific action can be assigned.
Therefor
•
select one of the available actions for each FPW-pedal by using the ControlBar,
•
confirm the selection with the middle button of the ControlBar.
2. Operation
•
The FPW starts automatically when pressing any pedal on the FPW.
•
After several minutes of inactivity, the FPW goes to StandBy mode automatically.
•
Press the required FPW-pedal for more than ~0,5 sec to perform the action you assigned
to it.
•
To toggl
e between “double actions” (as Zoom In/Out), simply tap the button once briefly.
3. Maintanance
•
The FPW needs a 9V block battery.
•
To replace the battery, open the Battery compartment on the bottom side of the FPW.
