6
Supporting 3D Video Formats (Input):
Signal
Resolution
Frequency
3D video format
720p
1280 x 720
60Hz
Side-by-Side (Half)
50Hz
Side-by-Side (Half)
1080p
1920 x 1080
60Hz
Side-by-Side (Half)
50Hz
Side-by-Side (Half)
Technical Specification
HDMI Input
HDMI Receiver (Type A 19-pin female) x1 / Gold plated
HDMI Output
HDMI Transmitter (Type A 19-pin female) x1 / Gold plated
HDMI Standard (RX)
(TX)
Compliant with HDMI 1.3a , HDCP 1.2
Compliant with HDMI 1.3a , HDMI 1.4a 3D , HDCP 1.2
Operation pixel
frequency range
link clock rate of 225MHz
Single Link Range
2.25Gbps
HDMI DDC Signal
5Vp-p
Input Video Signal
1.2 Vp-p max.
Remote Control
Frequency carrier of 38kHz
Power Supply
DC 5V/1A
Support Output
3D Formats
Active Shutter 3D Display based on same conditions
1. Frame Packing - Frame sequential 60Hz ( DLP-Link)
2. Side-by-Side (Half)
3. Chequer Board Encoding ( Left-Blue / Right-Red )
TROUBLE SHOOTING
1. When there is no picture presented, please:
Make sure the direct connection from the source device to the display device without the 3D
Creator is working.
Check if all connectors are connected well; and check if all cables can support the transmission
speed. High Speed HDMI cables are recommended.
Check the power of 3D Creator in on.
3D Creator does not have de-interlace function, please set the output signal of source devices
to 1080p, 720p, or 480p.
3D Creator may not support some 3D videos that are formatted in 1080p/24fps. It may cause no
pictures presented on the sink device.
2. When there is only picture displayed and without sound:
Check the cable connection to see if it fits properly.
Check your cable to see if it supports video transmission only (DVI) or it is damaged.
HDCP may not match very well at first connection; please restart your 3D Creator.
