3D Corporation TS-EXHS, Руководство пользователя

Страница: 7 / 28

Instruc
tions manual - English - EN
5 MNVCEXHCJP_1504_EN
1 About this manual
Before installing and using this unit, please read this
manual carefully. Be sure to keep it handy for later
reference.
1.1 Typographical conventions
g
DANGER!
High level hazard.
Risk of electric shock; disconnect the
power supply before proceeding with any
operation, unless indicated otherwise.
o
DANGER!
Explosion hazard.
Read carefully to avoid danger of explosion.
h
WARNING!
Medium level hazard.
This operation is very important for the
system to function properly. Please read
the procedure described very carefully and
carry it out as instructed.
j
INFO
Description of system specifications.
We recommend reading this part carefully
in order to understand the subsequent
stages.
2 Notes on copyright and
information on trademarks
The quoted names of products or companies are
trademarks or registered trademarks.
3 Safety rules
h
The TS-EXHS camera is certified in
compliance with TIIS Standard which
define the application field and safety
requirements and made for use in explosive
atmospheres. Make sure that this unit
is suitable for the environment in which
it will be installed and please carry this
installation out very carefully according to
TIIS Standard.
h
This device must be connected to an earth
conductor.
Fig. 01
Earth connection.
• According to TIIS Standard, make sure that all the
devices are suitable for the application and for the
environment in which they will be installed.
• Make sure that the connected devices are
completely compatible and suitable for use.
• We strongly recommend using only approved
cable glands during installation.
• Make sure the operating temperatures are
compatible with the devices.
• When installing the devices make sure the system
and installer personnel are absolutely safe.
• Choose an installation site that is strong enough
to sustain the weight of the device, also bearing
in mind particular environmental aspects, such as
exposure to strong winds.
• We strongly recommend using only approved
brackets and accessories during installation.
Otherwise, it might cause accidents such as
explosion due to looseness or fall of housing.
• Make sure that the device is firmly anchored so
that it cannot become detached. We recommend
to take measures against the fall of unit.
• Neither screws nor nuts are equipped with this
unit. Persons in charge of installation should
prepare them according to the environment in
which it will be installed.
• The device must be installed and maintained only
and exclusively by qualified technical personnel.
• Use appropriate tools for the purpose. The
particular nature of the site where the device is to
be installed may mean special tools are required
for installation.