3D AEROWORKS Yakovlev Yak-3, Руководство по сборке и инструкция пользователя

Страница: 11 / 24

12
Glue the wingtips and tail cone in place (if required).
13
Cut one 110mm section and four (2 per wing)15mm sections of skewer. Insert the 15mm
sections into the wings and the 110mm section through the fuselage. This is a makeshift spar
to assist supporting the landing gear. (not required if not using the gear)
Glue the wings to the fuselage NOTE – if using 3mm x 0.6mm carbon strip, now is the time
to install it. Simply slide the carbon strip into the slot and cut it so it does not protrude out of
the wing (circled in red, see image). The cross structure of the fuselage spreads the load of
the wings at the root which negates the need of a connecting spar in the fuselage.
.