3-5
6) After the access controller is pushed in, make sure that the upper side of the rear mounting
brackets and the bearing screws are closely touched, as shown in Figure 3-8.
Figure 3-8
Installation with front and rear mounting brackets
(1)
(2)
(3)
(1) Rear square-hole rack rail
(2) Bearing screw
(3) Rear mounting bracket
7) Use screws and the corresponding cage nuts to fix the front mounting brackets to the front
square-hole rack rails, so that the front and rear mounting brackets can fix the access controller on
the rack horizontally and steadily, as shown in Figure 3-9.
