3Com VCX V7000, Руководство для руководителей

Страница: 76 / 118

76 C
HAPTER
5: S
TANDARD
F
EATURES
group mailbox or to the receptionist. In addition, hunt group members
can be in a distributed environment across multiple sites in the Enterprise.
An administrator can configure a hunt group in which all members are
fax machines. Incoming faxes are routed to an available fax machine.
Depending on the type of hunt group configured, if no fax machine is
available, pending faxes may be queued until a machine becomes
available or they may be sent to the call coverage point.
The method used to hunt for an available hunt group member is
determined by an administrator-configured call coverage pattern for that
group. Pattern types include linear, circular, and calling groups. These
patterns are described in
Hunt Group Types .
If you dial a hunt group number using SA1, and then press the SA1
button while the call is ringing the hunt group number, the hunt group
call does not disconnect. To disconnect a call while dialing a hunt group,
press the hookswitch or hang up the phone.
If you are a member of a hunt group, your administrator should provide
the following information:
■
The type of hunt group to which you belong. The hunt group type
determines the ringing pattern followed by incoming calls. See
Hunt
Group Types .
■
Your hunt group number. You need this number to log in to the hunt
group. You must be logged in to receive calls directed to the hunt
group. See
Logging In to a Hunt Group .
You can be a member of, and logged in to, multiple hunt groups,
which may be of different hunt group types.
As a hunt group member, you should also be aware of how hunt group
calls work with other VCX phone features, such as call conferencing. See
Hunt Group Interaction With Other Features .
Hunt Group Types The type of hunt group to which you belong determines how incoming
calls are allocated to group members. Your administrator can configure a
linear hunt group, a circular hunt group, and a calling group.
To illustrate the differences between hunt group types, assume the
administrator has configured four members for each type: A, B, C, and D.