3Com VCX V7000, Руководство по установке и обслуживанию

Страница: 86 / 144

86 C
HAPTER
4: I
NSTALLING
L
ANGUAGE
P
ROMPTS
4 Stop and restart UMS by entering these commands:
cd /opt/3com/VCX/UMS/vcx-scripts/init.d
./S95ums stop
./S95ums start
To assign a set of language prompts to any UMS mailbox, use your
browser to log in to the VCX Administrator Interface and follow the
instructions in the VCX Administration Guide.
Downloading
Language Prompts
To install a set of language prompts if the prompts package is not on your
system:
Downloading to the Primary UMS Server
1 Log in as root on the primary UMS server.
2 Log in to the 3Com Partner Access web site and locate the prompt file.
3 Download the language RPM file and place it in this directory:
/opt/installtemp
Example: The file that contains the UK English prompts and is compatible
with a G711 codec is UMS-UK-EN-G711u-SPEAK-1-1.i386.rpm. This file
name is used in the remaining steps of this procedure. Select the file
name that applies to the language and codec that you want. The version
numbers within the file (-1-1 in this example) will change over time.
4 Enter these commands:
cd /opt/installtemp
vcx-install UMS-UK-EN-G711u-SPEAK-1-1.i386.rpm
5 Follow the instructions in “Language Prompts Already on Your VCX
System” , earlier in this chapter to install the prompts.
To assign a set of language prompts to any UMS mailbox, use your
browser to log in to the VCX Administrator Interface and follow the
instructions in the VCX Administration Guide.
Downloading to the Secondary UMS Server
1 Log in as root on the secondary UMS server.
2 Log in to the 3Com Partner Access web site and locate the prompt file.
3 Download the language RPM file and place it in this directory:
/opt/installtemp