3Com VCX V7000 страница 190 Скачать руководство пользователя

Страница: 190 / 344

190

PPENDIX

A: U

PGRADING

VCX S

ERVER

OFTWARE

ROM

V7.0

V7.1

The system displays several status messages. The last two messages are:

------------------- Installation Completed Successfully -------------------

------------------- VCX version 7.1.

c is now available -------------------

Change to the new software version by entering this command:

vcx-switchversion 7.1.

The system displays several status messages and provides prompts that
allow you enable Adhoc Conferencing and UPS Monitoring.

The Adhoc Conferencing prompt appears:

In order to support "ad-hoc" conferences with more than 3

participants, the Adhoc Conference Service is used. This

service should be enabled on this server, unless another

server dedicated to Adhoc Conferencing will be used instead.

If available, a separate server typically provides greater

capacity and may be shared among sites.

Use the Adhoc service on this server? (Y/N) [Y] :

If you want this server to act as a multi-caller (up to 6 callers)
conferencing server, enter

. If not, enter

The UPS Monitoring prompt appears:

An Uninterruptible Power Supply (UPS) can be used with VCX

systems to avoid disruption due to a power outage. VCX

provides a UPS monitoring service which tracks the UPS's

status and performs a safe shutdown when the its battery is

depleted during a long power outage. To use this feature,

you must have a compatible UPS installed and configured in

accordance with the VCX documentation.

Enable UPS monitoring? [N] :

If you do not have a UPS installed and enter

(or press

Enter

); the

remaining UPS configuration prompts are not displayed.

If you do have a UPS installed and enter

and see

Configuring UPS

Monitoring

for information on the subsequent UPS configuration

prompts.

After completing the Adhoc Conferencing and UPS Monitoring prompts,
the server reboots. When the reboot process has been completed, the
system starts VCX 7.1.

services.

After the system has completed the restart process, verify that the
upgrade has occurred by entering the following command:

Содержание VCX V7000

























































































































































































































































































































































Результаты поиска

Содержание VCX V7000

Отзывы:

Похожие инструкции для VCX V7000

Бренды по названию

Популярные бренды

3Com VCX V7000, Руководство по обслуживанию

Результаты поиска

Содержание VCX V7000

Отзывы:

Похожие инструкции для VCX V7000

Бренды по названию

Популярные бренды