3Com V6100, Руководство по установке

Страница: 43 / 47

8
In the ‘FINISH’ screen (see Figure 19 ), the Next button is disabled. Complete the
upgrade process by clicking Reset or Cancel .
ƒ
Click Reset , the V6100 ‘burns’ the newly loaded files to flash memory. The ‘Burning
files to flash memory’ screen appears. Wait for the ‘burn’ to finish. When it finishes,
the ‘End Process’ screen appears displaying the burned configuration files (see
Figure 20 ).
ƒ
Click Cancel , the V6100 resets, utilizing the files previously stored in flash memory.
(Note that these are NOT the files you loaded in the previous Wizard steps).
Figure 19 FINISH Screen
Figure 20 ‘End Process’ Screen
9
Click the End Process button; the ‘Quick Setup’ screen appears and the full Web
application is reactivated.
Updating the Auxiliary Files
The auxiliary files are configuration dat files that are loaded to the gateway (in addition to the
ini file) to enable enhanced gateway provisioning. The following common auxiliary files are
available: CAS, Voice Prompts and Call Progress Tones (CPT). For information on additional
auxiliary files, refer to the
V6100 Digital Gateway User Guide. Table 5 presents a brief
description of the ini file and of each auxiliary file.
V6100 Digital Gateway Installation Guide
43