3Com TokenLink Velocity XL 3C359B, Руководство пользователя

Страница: 89 / 137

88 C
HAPTER
5: IBM E
NVIRONMENTS
a:\ndis2\dos
■
If you are using the TokenLink Velocity XL CD, substitute
the appropriate drive (drive D, for example) and the
DISK_2 designation in the path as follows:
d:\disk_2\ndis2\dos
6 Insert the IBM LAN Support Program diskette in the
drive when prompted.
The Primary Adapter Driver shown is 3Com TokenLink
Velocity XL PCI .
7 Press F4 to install the driver.
8 If you are using the 3.5-inch TokenDisk diskettes,
insert TokenDisk diskette 1 in the drive when
prompted.
This completes the installation of DXMAID and the DOS
NDIS 2.01 driver. Restart your computer and install your
host connectivity application.
Installing a Driver for IBM DOS LAN Services
Follow these steps to install the NDIS 2.01 driver for IBM
DOS LAN Services for IBM LAN Server 4.0 or IBM Warp
Server:
1 Create a temporary directory on your DOS PC. For
example, enter:
mkdir c:\temp
2 If you are using 3.5-inch diskettes, insert TokenDisk
diskette 2 in the drive. If you are using the TokenLink
Velocity XL CD, insert it in the CD-ROM drive.
3 Copy the following files from the TokenDisk diskette or
TokenLink Velocity XL CD to the temporary directory.
■
If you are using the 3.5-inch TokenDisk diskettes, enter:
copy a:\ndis2\dos\oemsetup.inf c:\temp
copy a:\ndis2\dos\tlpn2.dos c:\temp
■
If you are using the TokenLink Velocity XL CD, substitute
the appropriate drive (drive D, for example) and the
DISK_2 designation in the path as follows:
copy d:\disk_2\ndis2\dos\oemsetup.inf c:\temp
copy d:\disk_2\ndis2\dos\tlpn2.dos c:\temp