3Com TokenLink 3C359, Быстрый старт

Страница: 6 / 8

4 Q
UICK
S
TART FOR THE
T
OKEN
L
INK
V
ELOCITY
XL PCI 3C359 NIC
2 Connect a token ring cable to the NIC.
For cabling details, see installation instructions in Chapter 2
and connector and cabling specifications in Appendix A of
the user guide.
3 Connect the other end of the cable to a network dual
access unit (DAU), a multistation access unit (MAU),
controlled access unit (CAU), or a token ring switch.
The 3C359 NIC can operate in full-duplex mode when
attached to a Dedicated Token Ring (DTR)-enabled switch.
4 Turn the PC power on.
The PCI system automatically configures the 3C359 NIC.
5 Choose the appropriate network device driver for
your operating system environment.
6 Install the network driver from the appropriate
directory on the TokenDisk diskettes or on the
TokenDisk CD, as shown in Table 1.
7 Verify your configuration options.
Table 2 lists the default configuration option settings of the
3C359 NIC at shipment.
Table 1 Driver Directory Locations on 3C359 NIC TokenDisk Diskettes
Driver
TokenDisk
Diskette No. Driver Directories
Microsoft NDIS 4.0
miniport 2 \W98NT40
Microsoft NDIS 3.0
miniport 2 \W95NT351
NDIS 2.01 OS/2 2 \NDIS2\OS2
NDIS 2.01 DOS 2 \NDIS2\DOS
NetWare DOS ODI
16-bit client 1 \NETWARE\NWCLIENT
NetWare ODI OS/2 client 1 \
NetWare ODI 32-bit
client (ODI 3.3 spec.) 1 \NETWARE\CLIENT32
NetWare ODI 32-bit
server (ODI 3.3 spec.) 1 \NETWARE\NWSERVER\3.12
\NETWARE\NWSERVER\4.1x
Microsoft NDIS 4.0
miniport 2 \W98NT40
Book Page 4 Saturday, November 1, 1997 11:41 AM