3Com Switch 4500 26-Port, Руководство по настройке

Страница: 84 / 396

82 C
HAPTER
5: N
ETWORK
P
ROTOCOL
O
PERATION
The IP address configuration is described in the following sections:
■
Configuring the Hostname and Host IP Address
■
Configuring the IP Address of the VLAN Interface
Configuring the Hostname and Host IP Address
The host name is corresponded to the IP address by using this command. When
you use applications like Telnet, you can use the host name without having to
memorize the IP address since the system translates it to the IP address
automatically.
Perform the following configuration in System View.
By default, there is no host name associated to any host IP address.
For further information on IP Address configuration, please refer to the Getting
Started Guide that accompanies your Switch.
Configuring the IP Address of the VLAN Interface
You can configure an IP address for every VLAN interface of the Switch.
Perform the following configuration in VLAN Interface View.
By default, the IP address of a VLAN interface is null.
Displaying and
Debugging IP Address
After the above configuration, enter the
display
command in any view to display
the IP addresses configured on interfaces of the network device, and to verify the
effect of the configuration.
Table 76 Configuring the Host Name and the Corresponding IP Address
Operation Command
Configure the hostname and the
corresponding IP address
ip host hostname ip_address
Delete the hostname and the corresponding
IP address
undo ip host hostname
[
ip_address
]
Table 77 Configuring the IP Address for a VLAN Interface
Operation Command
Configure IP address for a
VLAN interface
ip address ip_address
{
mask
|
mask_length }
Delete the IP address of a
VLAN interface
undo ip address ip-address
{
mask
|
mask_length
}
Table 78 Displaying and Debugging IP Address
Operation Command
Display all hosts on the network and the
corresponding IP addresses
display ip host
Display the configurations of each
interface
display ip interface interface_type
interface_num