2
Documentation Errors and Omissions
The following relate to the “Adding and Editing IPSec
Connections” section, starting on page 52 of the OfficeConnect
Cable/DSL Secure Gateway User Guide (DUA08569-5AAA01):
■
The User Guide indicates that you can enter a domain name
at
Remote IPSec Server Address
. This is incorrect. Only IP
addresses can be entered in their numeric format.
■
If both
Connection Name
and
This Gateway’s ID
are set using
numeric IP addresses then the Gateway to Gateway
connection will use main mode. Otherwise, it will use
aggressive mode.
■
The User Guide indicates that the
This Gateway’s ID
field only
appears in the
IPSec Tunnel Configuration
dialog box if
Gateway to Gateway
is selected. In fact, the
This Gateway’s
ID
field
also appears if
Remote User Access
is selected.
■
The
IPSec Tunnel Configuration
dialog contains an additional
field named
Hash Algorithm.
Choose either SHA-1 or MD5
from the drop-down list. Both ends of the connection must
use the same value.
Copyright © 2002, 3Com Technologies. All rights reserved.
Unless otherwise indicated, 3Com registered trademarks are registered in the United
States and may or may not be registered in other countries.
3Com, the 3Com logo and OfficeConnect are registered trademarks of 3Com
Corporation.
Windows is a registered trademark of Microsoft Corporation. Other brand and product
names may be registered trademarks or trademarks of their respective holders.
Part Number: DNA08569-5AAA02
June 2002
DNA08569-5AAA02.fm Page 2 Thursday, June 6, 2002 4:23 PM
