Configuring the Client Site
9
6
Specify the site name you would like to designate for this dial-in user’s remote LAN
Modem, A, B or C. Note that this site name must be different from the site name
designated in this LAN Modem’s Dial-In Global Parameters, in order to distinguish
between the two networks. The site name specified here will match the site name
configured in the client LAN Modem’s Dial-in Global Parameters.
7
Click
Next.
The Congratulations page opens, indicating the successful creation of a dial-in
user.
8
Click
Continue.
This completes the dial-in configuration for LAN Modem Site-to-Site dial-in. To
continue setting up your LAN Modem for dial-in access, go on to “Configuring the
Client Site”.
Advanced Dial-In Wizard Instructions
1
From the LAN Modem main configuration page, click
Dial-in
.
2
Click
Dial-in Wizard
.
3
Select
Advanced
and then click
Next
.
The Username and Password page appears.
4
Enter a unique name and password to identify and verify this dial-in user when
dialing into this LAN Modem.
5
Click
Next.
The dial-in user parameters page appears, allowing you to manually configure the
Advanced dial-in user parameters. For further configuration instructions refer to
“Dial-in Users Parameters Screen”.
Configuring the Client
Site
To configure a dial-in user profile on the client site refer to the appropriate section:
■
Configuring the client site for a single modem
■
Configuring the client site for a LAN Modem
Configuring the Client
Site for a Single Modem
If the client dialing into the LAN Modem will be a single modem, use the
appropriate software such as Dial-Up Networking for Windows to create a
connection to the LAN Modem. The basic steps for creating a Dial-Up Networking
connection are as follows.
■
Create a Dial-Up Network entry
■
Enter the telephone number of the remote LAN Modem
■
Enter the username and password
