Configuring the 3C882 ISDN Modem for a Macintosh Computer
4-5
2
Select the port to which the 3C882 ISDN modem is
connected and then click
OK
.
The SPID Wizard start screen appears, as shown in Figure 4-8.
Figure 4-8
SPID Wizard Start Screen
If you do not want to run the SPID Wizard, click Cancel. The
Configuration dialog box appears (see Figure 4-13). Select
your ISDN switch type, and then enter the telephone
number(s) and, if required, enter the corresponding SPID(s) for
your ISDN line. Refer to the section “Configuring Multilink
PPP”.
3
Click
Next
.
The SPID Wizard first checks for ISDN layer 1 status, and then
configures the switch type. The status is indicated, as shown
in Figure 4-9.
