3Com HomeConnect 3CR29220, Руководство по началу работы

Страница: 13 / 38

Configuring the TCP/IP Protocol 15
to remove the check mark. Then click the Info button in the
lower left corner.
7 Ensure there is a Hardware Address listed in this window. If
there is, click the
OK button and close the “TCP/IP Control
Panel” (click File and scroll down to click Close ). If there is
no Hardware Address, you must shut down and power off
your Macintosh. With the power off, simultaneously
depress and hold down the
Command ( Apple ), Option , P ,
and R keys on your keyboard. Keeping those keys
depressed, power on the Macintosh. The machine will start
and you will hear the Apple chime. Keep these keys
depressed for up to 3 chimes, then release the keys and
allow the computer to start-up. When fully rebooted,
ensure that all TCP/IP settings match those in the preceding
instructions. If your computer still does not have a
Hardware Address, please contact your local Apple
authorized dealer or Apple support.