3Com e-PC c10/s10, Руководство пользователя, Страница: 98 / 122

8 8 6 6 C C h h a a p p t t e e r r 9 9
Are there routers between the server and the PC? Routers between the server and
the PC will cause problems because the RPL protocol is not routable
NDIS Drivers Require More Memory to Load
After the NDIS driver is loaded, you may see the following message:
The program below needs more memory XX K (NDIS driver name) The
workstation failed to boot
where XX indicates the amount of additional memory (in kilobytes) needed.
In the DOSBB.CNF file, the second parameter of a DRV entry specifies the amount of
additional memory to allocate to the driver. For example, if the original NDIS DRV
entry is:
drv bblock\ndis\feth.dos ~ ~ ~
and the boot block reports that 5 KB of additional memory is needed, change the entry
to:
drv bblock\ndis\feth.dos ~ 5 ~
Boot Block Fails to Load DOS
After RPLBIND1 and RPLBIND2 are executed, the boot block prints the following
message:
Non-system disk or disk error Replace and press any key when ready
The message is printed when the boot block fails to load DOS from the server. Check
that the DOS system files are copied correctly to:
\\%systemroot%\rpl\rplfiles\binfiles\dosxxx.
Make sure the attributes HIDDEN and SYSTEM are removed from the files, IO.SYS and
MSDOS.SYS. If you are using IBM PC-DOS, rename IBMBIO.COM and IBMDOS.COM to
IO.SYS and MSDOS.SYS.