3Com CoreBuilder 9000, Руководство пользователя

Страница: 200 / 468

200 C
HAPTER
7: C
ONFIGURING
V
IRTUAL
C
HANNELS
Display UNI Signaling
Timers
Display the current Q93B signaling timer values in seconds. These values
are the same for all ports because they all work on a common timer. Enter
any port identifier. To alter these values, update the timer resolution. For
more information, see “Update Protocol Timer Resolution” on page 199.
Command Actions
Command Result
Enter the menu sequence:
(1) SYS: Platform configuration
(1) SET: Switch setup
(4) SIG: Signaling setup
(2) TMR: Get Signaling Q93B timers
Enter a parameter at the prompt
Parameter Format or Range
Port number <slot.group.port>
Direct access sequence:
1 1 4 2
[parameters]
System action taken: The current Q93B Signaling timers for all ports are
displayed in seconds.
System message display: Information is displayed as shown in the example.