3Com CommWorks 5210 Скачать руководство пользователя страница 89

Страница: 89 / 144

Invocation Errors

Error: Too many targets specified

The user specified more than one IP address/slot-channel combination. (There
is more than one white space-separated word in the target list.)

Invalid target format

The target does not specify a valid IP address or host name.

Missing -T option

The user did not choose a test to execute using the -T option. (Non-GUI only)

target

>: Non-Modem Test operation

Reported in the test tool final summary when a command or other
non-modem test result is in the target’s result table. (Non-GUI, warning only)

Program exit during execution

The command or test program was terminated (e.g., by a signal) while a
command or test was in progress. (Warning only)

IP Telephony Manager

Console

The following are the IP Telephony Manager Console error message and what
it indicates.

Error: Too many targets specified

The user specified more than one IP address/host name. (There is more than
one white space-separated word in the target list.)

Tone Send/Receive

The following are the Tone Send/Receive error messages and what they
indicate.

Error: Invalid amplitude value <

value

The amplitude level given on the command line is out of range.

Error: invalid poll interval value <

value

The poll interval value given on the command line is not a positive integer.

Error: invalid test length value <

value

The test duration value given on the command line is not a positive integer

Error: No target specified

The user did not supply an IP address or host name on the command line.

Invalid target specification: <

specification

The target does not specify a valid IP address or host name.

Trap Destination

The following are the Trap Destination error messages and what they indicate.

Содержание CommWorks 5210
















































































































































Результаты поиска

Содержание CommWorks 5210

Отзывы:

Похожие инструкции для CommWorks 5210

Бренды по названию

Популярные бренды

3Com CommWorks 5210, Руководство пользователя

Результаты поиска

Содержание CommWorks 5210

Отзывы:

Похожие инструкции для CommWorks 5210

Бренды по названию

Популярные бренды