![background image](http://html1.mh-extra.com/html/3com/cable-modem-external/cable-modem-external_getting-started-manual_440904037.webp)
Troubleshooting the Ethernet Installation
33
cables so that the cable modem is connected directly to
the cable wall jack. Then try reconnecting to your cable
service provider.
■
Check for a resource conflict. To do this, right-click the
My Computer icon on the Windows desktop. Then click
Properties
. Click the Device Manager tab and look for a
yellow exclamation point or red X over the NIC in the
Network adapters field. If you see either, you have an
IRQ conflict. Refer to the manufacturer’s documentation
that came with your network interface card.
■
Make sure that TCP/IP is the default protocol in use by
your computer.
■
Release and renew the computer’s IP address.
To release and renew the IP address for the
Windows 95/98 operating system:
a
Click Windows
Start
and click
Run
.
b
Type
winipcfg
in the Open field and click
OK
. The IP
Configuration screen appears.
c
In the Ethernet Adapter Information group area, click
the drop down arrow and select the Ethernet adapter.
d
Click
Release
. The IP address changes to
0.0.0.0.
Содержание Cable Modem External
