Viewing Test Results
6-9
9
Click
Start
to run the External Loopback Te
st.
The test runs ten times by default. If you want to change the
number of test repetitions, click
Test Setup
.
10
If the test fails, go to the section “What to Do If a Test Fails”
later in this chapter.
11
Remove the loopback plug and insert the network cable.
Viewing Test Results
The Test Results screen shown in Figure 6-6 appears after the
tests have been run, showing the number of times each test
was run and the pass/fail results.
Figure 6-6
Test Results Screen
