3Com AirConnect 9550 Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 95

background image

3Com Corporation 350 Campus Drive Marlborough, MA 01752-3064

Copyright © 2008, 3Com Corporation. All rights reserved. No part of this documentation may be
reproduced in any form or by any means or used to make any derivative work (such as translation,
transformation, or adaptation) without written permission from 3Com Corporation.

3Com Corporation reserves the right to revise this documentation and to make changes in content from
time to time without obligation on the part of 3Com Corporation to provide notification of such revision or
change.

3Com Corporation provides this documentation without warranty, term, or condition of any kind, implied
or expressed, including, but not limited to, the implied warranties, terms or conditions of merchantability,
satisfactory quality, and fitness for a particular purpose. 3Com may make improvements or changes in the
product(s) and/or the program(s) described in this documentation at any time.

If there is any software on removable media described in this documentation, it is furnished under a license
agreement included with the product as a separate document, in the hard copy documentation, or on the
removable media in a directory file named LICENSE.TXT or !LICENSE.TXT. If you are unable to locate a copy,
contact 3Com and a copy will be provided to you.

UNITED STATES GOVERNMENT LEGEND

If you are a United States government agency, then this documentation and the software described herein
are provided to you subject to the following:

All technical data and computer software are commercial in nature and developed solely at private expense.

Software is delivered as “Commercial Computer Software” as defined in DFARS 252.227-7014 (June 1995)
or as a “commercial item” as defined in FAR 2.101(a) and as such is provided with only such rights as are
provided in 3Com’s standard commercial license for the Software. Technical data is provided with limited
rights only as provided in DFAR 252.227-7015 (Nov 1995) or FAR 52.227-14 (June 1987), whichever is
applicable. You agree not to remove or deface any portion of any legend provided on any licensed program
or documentation contained in, or delivered to you in conjunction with, this User Guide.

Unless otherwise indicated, 3Com registered trademarks are registered in the United States and may or may
not be registered in other countries.

3Com and the 3Com logo are registered trademarks of 3Com Corporation.

Intel and Pentium are registered trademarks of Intel Corporation. Microsoft, MS-DOS, Windows, and
Windows NT are registered trademarks of Microsoft Corporation. Novell and NetWare are registered
trademarks of Novell, Inc. UNIX is a registered trademark in the United States and other countries, licensed
exclusively through X/Open Company, Ltd.

IEEE and 802 are registered trademarks of the Institute of Electrical and Electronics Engineers, Inc.

«
1
2
3
4
5
...
»

Содержание AirConnect 9550
































































































Отзывы:

Нет отзывов

Похожие инструкции для AirConnect 9550

Бренд: Ubiquiti Страницы: 32

Бренд: TP-Link Страницы: 105

WNR3500 - RangeMax Next Wireless-N Gigabit Router Wireless

Бренд: NETGEAR Страницы: 124

Archer A20 AC4000 MU-MIMO

Бренд: TP-Link Страницы: 126

RUCKUS ZoneDirector 1200

Бренд: Arris Страницы: 2

Бренд: ReadyNet Страницы: 2

Бренд: Hewlett Packard Enterprise Страницы: 53

Бренд: Obihai Страницы: 4

Бренд: Linksys Страницы: 123

Бренд: Kraun Страницы: 55

Бренд: D-Link Страницы: 101

RG-AP820-L(V2) Series

Бренд: Ruijie Страницы: 26

Бренд: Ruijie Страницы: 11

Бренд: Cambium Networks Страницы: 16

Wireless LAN Access Point

Бренд: Atmel Страницы: 64

Бренд: Ebyte Страницы: 13

Бренд: Pentagram Страницы: 56

IsoStation 5AC IS-5AC

Бренд: Ubiquiti Страницы: 24

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды