Installing The Module
2
-
3
Installing the Rear Card
Figure 2-1
Installing The Rear Card
1
Locate the rear slot equivalent to the front slot into which you will
install the front card.
2
Remove the metal blanking plate at the rear of the chassis and retain
the screws.
Retain the blanking plate. If you remove the module, the blanking plate
must
be refitted to the chassis to aid the circulation of cooling air and
to prevent dust and debris entering the unit.
3
Insert the rear card with the RJ45 ports at the top of the card and slide
it home along the guide rails so that it connects with the backplane.
4
Secure the rear card into position using the screws from the blanking plate.
Содержание ACCESSBUILDER 7000
