3Com Switch 4500G Family
43
Command Reference
schedule reboot at
Use the
schedule reboot at
command to enable the scheduled reboot function of the router and schedule
the reboot time and date.
User view
schedule reboot delay
Use the
schedule reboot delay
command to enable the timing reboot switch function and set the waiting
time.
User view
screen-length
Use the
screen-length
command to set the number of lines the terminal screen can contain.
User Interface view
secondary accounting
Use the
secondary accounting
command to set the IP address and port number of the secondary RADIUS
accounting server.
RADIUS Scheme view
secondary accounting
Use the
secondary accounting
command to configure a secondary accounting server.
Scheme view
secondary authentication
Use the
secondary authentication
command to set the IP address and port number of the secondary
RADIUS authentication/authorization server.
RADIUS Scheme view
secondary authentication
Use the
secondary authentication
command to configure a secondary authentication server.
Scheme view
secondary authorization
Use the
secondary authorization
command to configure a secondary authorization server.
Scheme view
self-service-url
Use the
self-service-url
command to enable the self-service server location function.
Use the
self-service-url disable
command to disable the self-service server location function
ISP Domain view
send
Use the
send
command to send messages to a specified user interface or all user interfaces.
User view
send-trap
Use the
send-trap
command to enable the Trap debugging (A Trap message is sent to the network
management server).
NQA Test Group view
sendpacket passroute
Use the
sendpacket passroute
command to enable routing table bypass function to test the direct
connectivity to the destination.
NQA Test Group view
server-type
Use the
server-type
command to configure the RADIUS server type supported by the Switch.
RADIUS Scheme view
service-type
Use the command
service-type
to specify the login type and the corresponding available command level.
Local User view
service-type
Use the command
service-type
to authorize a user access to the specified services.
Local User view
service-type ftp
Use the
service-type ftp
command to configure the FTP service type and accessible directories for
users.
Local User view
