3Com 4200G Series, Руководство по началу работы

Страница: 39 / 90

Setting Up Your Switch 39
the data. To securely administer the switch using the command line
interface you need a third party SSH client.
Web Interface
Management
Each switch has an internal set of web pages that allows you to manage
the switch using a Web browser remotely over an IP network (see
Figure 14).
Figure 14 Web Interface Management over the Network
Refer to “Setting Up Web Interface Management” on page 53.
SNMP Management You can manage a switch using any network management workstation
running the Simple Network Management Protocol (SNMP) as shown in
Figure 15. For a description of 3Com network management applications,
refer to “3Com Network Management” on page 75.
Figure 15 SNMP Management over the Network
Refer to “Setting Up SNMP Management” on page 54.
Setting Up Your
Switch
This section provides an overview of what you need to do to get your
Switch set up and ready for management when it is in its default state.
The setup process is summarized in Figure 16. Detailed steps are
contained in the sections that follow. In brief, you need to:
■
Configure IP information manually for your switch or view the
automatically configured IP information.
Workstation
Switch
Connect over Network
via web browser
SNMP Network Management
Workstation
Switch
Connect over Network
using SNMP
10014914_AB_Switch 4200G.book Page 39 Tuesday, October 2, 2007 12:13 PM