3Com 3CRWX120695A, Руководство по настройке

Страница: 201 / 728

MAP Overview 201
1 MAP sends a DHCP Discover message from the MAP’s port 1.
2 Because WX1 is configured for direct attachment, WX1 responds
privately to the MAP and provides the MAP with its operational image (or
indicates that the MAp should use a locally stored image) and
configuration from WX1. Only in the event of a physical port failure
would the MAP attempt to boot from its port 2, in which case both WX1
and WX2 would respond to the broadcast Find WX message.
Example Boot of
MAP with Static IP
Configuration
Figure 17 shows an example of the boot process for a MAP configured
with static IP information. In the example, the MAP has been configured
to use the following:
„
Static IP address: 172.16.0.42, netmask: 255.255.255.0, default
router 172.16.0.20
„
Boot WX switch: wxr100, DNS server: 172.16.0.1
Figure 17 MAP Booting with a Static IP Address
System FQDN:
mxr2
MX Switch
Layer 2
DNS Server
172.16.0.1
2
4
1
DAP 1
static IP: 172.16.0.42
3
5
6
WX Switch