background image

106

A

PPENDIX

 C: E

ND

 U

SER

 S

OFTWARE

 L

ICENSE

 A

GREEMENT

organization or other party identified on the U.S. Department of 
Commerce’s Table of Denial Orders or the U.S. Department of Treasury’s 
lists of "Specially Designated Nationals and Blocked Persons," as 
published and revised from time to time; (iii) to any party engaged in 
nuclear, chemical/biological weapons or missile proliferation activities,  
unless authorized by U.S. and local (as required) law or regulations.

TRADE SECRETS; TITLE:

  You acknowledge and agree that the 

structure, sequence and organization of the Software are the valuable 
trade secrets of 3Com and its licensors. You agree to hold such trade 
secrets in confidence. You further acknowledge and agree that the 
Software is licensed and not sold to you and that all ownership of, and title 
to, the Software and Documentation and all subsequent copies thereof 
regardless of the form or media are held by 3Com and its licensors.

UNITED STATES GOVERNMENT RESTRICTED RIGHTS: 

 The Software 

and Documentation are “Commercial Items(s)” as defined in 48 C.F.R. 
§2.101, consisting of “Commercial Computer Software” and “Commercial 
Computer Software Documentation”, as such terms are used in 48 C.F.R. 
§ 12.212 or 48 C.F.R. §227.7202, as applicable.  Consistent with 48 
C.F.R. §12.212 or 48 C.F.R. §227-7202-1 through 227.7202-4, as 
applicable, the Commercial Computer Software and Commercial 
Computer Software Documentation are being licensed U.S. Government 
end users (a) only as Commercial Items and (b) with only those rights as 
are granted to all other end users pursuant to the terms and conditions 
herein.  Therefore, if you are licensing the Software and/or Documentation 
for acquisition by the U.S. Government or any contractor therefore, you will 
license consistent with the policies set forth in 48 C.F.R. §12.212 (for 
civilian agencies) and 48 C.F.R. §227-7202-1 and 227.7202-4 (for the 
Department of Defense), and their successors.  

TERM AND TERMINATION:

  The licenses granted hereunder are 

perpetual unless terminated earlier as specified below. You may terminate 
the licenses and this Agreement at any time by destroying the Software 
and Documentation together with all copies and any portions thereof in 
any form. The licenses and this Agreement will also terminate immediately 
if you fail to comply with any term or condition of this Agreement. Upon 
such termination you agree to destroy the Software and Documentation, 
together with all copies and merged portions in any form.

Содержание 3CRWER101A-75





























































































































Отзывы: