3Com 3CRDSF9PWR-US - OfficeConnect Managed Fast Ethernet PoE Switch, Руководство пользователя

Страница: 117 / 256

117
The Port Administration Setup Page contains the following fields:
■
Port State — Specifies the port state. The possible values are:
■
Enabled — Enables the port.
■
Disabled — Disables the port.
■
No Change — Retains the current port status.
■
Flow Control — Specifies the flow control status on the port.
Operates when the port is in full duplex mode. The possible field
values are:
■
Enabled — Enables flow control on the port.
■
Disabled — Disables flow control on the port.
■
No Change — Retains the current flow control status on port.
■
Speed — Specifies the configured rate for the port. The port type
determines what speed setting options are available. The possible field
values are:
■
10 — Indicates the port is currently operating at 10 Mbps.
■
100 — Indicates the port is currently operating at 100 Mbps.
■
1000 — Indicates the port is currently operating at 1000 Mbps.
■
Auto — Use to automatically configure the port.
■
No Change — Retains the current port speed.
■
Duplex — Specifies the port duplex mode. This field is configurable
only when the port speed is set to 10M or 100M. The possible field
values are:
■
Full — The interface supports transmission between the device and
its link partner in both directions simultaneously.
■
Half — The interface supports transmission between the device
and the client in only one direction at a time.
■
Auto — Use to automatically configure the port.
■
No Change — Retains the current port duplex mode.
■
Select Ports — Selects the ports to be configured.
2 Define the configuration fields.
3 Select the ports to which these settings will be applied.
4 Click . The ports are configured, and the device is updated.