3Com 3CP5610A - U.S. Robotics 56K V90 PCI Performance Pro Faxmodem Dos/NT/Linux, Руководство пользователя

Страница: 87 / 100

S Registers 81
S9 6 Sets required duration, in
tenths of a second, of
remote modem's carrier
signal before recognition by
your 3Com U.S. Robotics
modem.
S10 14 Sets duration, in tenths of a
second, that modem waits to
hang up after loss of carrier.
This guard time allows your
modem to distinguish a line
disturbance from a true
disconnect (hang up) by the
remote modem.
Note: If you set S10 = 255,
the modem will not hang up
when carrier is lost.
Dropping DTR hangs up the
modem.
S11 70 Sets duration and spacing, in
milliseconds, for tone dialing.
S12 50 Sets duration, in fiftieths of a
second, of guard time for
escape code sequence (+++).
S13 0 Bit-mapped register. Select
the bit(s) you want on and
set S13 to the total of the
values in the Value column.
For example, ATS13 = 17
enables bit 0 (value is 1) and
bit 4 (value is 16).
Refer to Table 6-4
S14 0 Reserved
S15 0 Bit-mapped register setup.
To set the register, see
instructions for S13. Refer to
Table 6-5.
S16 0 Reserved
S17 0 Reserved
Table6-3
Register Default Function