3Com 3CB9E7 - CoreBuilder 9000 Chassis Switch, Руководство по началу работы

Страница: 103 / 132

Safety Information 103
WARNING:
Safety regulations state that the selected
table, shelf, or rack must be able to support at least
three times the weight of a fully loaded Switch. A
fully loaded:
■
7-slot chassis weighs approximately 38.55 kg
(85 lb). Therefore, the selected table or shelf must
support at least 115.65 kg (255 lb).
■
8-slot chassis weighs approximately 71.7 kg
(158 lb). Therefore, the selected table or shelf must
support at least
215.1 kg (474 lb)
.
■
16-slot chassis weighs approximately 88.5 kg
(195 lb). Therefore, the selected table or shelf must
support at least 265.5 kg (585 lb).
Denmark Safety Certification
The following warning is required for Denmark safety
certification:
WARNING: For use in Denmark, each 3CB9EP9
power supply must receive power from a separately
dedicated socket outlet having a 16-ampere fuse in
the installation. This product must be mounted in a
fixed installation such as a permanent rack.
WARNING: Ved brug i Danmark, skal hver 3CB9EP9
stromforsyning modtage strom fra en separat,
dedikeret stikkontakt med en 16-ampere sikring i
installationen.
Laser Warning
The following warning is required when you install
fiber-optic communication modules into the
CoreBuilder 9000 Enterprise Switch:
WARNING: To ensure optical safety when you install
a fiber-optic interface module, comply with the
following precaution:
Although the data communication LEDs and Lasers
used in this product meet the regulatory
requirements for casual exposure to the eye, as with
any source of bright light, 3Com recommends that
you do not look into the light source.
Laser Safety Information: IEC 825 and EN60825,
Class 1 Laser Device. For connection only to Class 1
Laser Devices.
FDA Class 1 Laser Device
This product complies with U.S. Department of Health
and Human Services Rules 21 CFR Subchapter J
applicable at date of manufacture.
CLASS 1
LASER PRODUCT