4-6
C
HAPTER
4: P
ERFORMING
T
ROUBLESHOOTING
AND
D
IAGNOSTIC
T
ESTS
The diagnostic programs listed above come on the
EtherDisk
diskette that accompanied the adapter.
4
From the main menu, select Echo Server Setup.
The program notifies you that your computer is now set up
as an echo server.
Starting the Group 3 Test
To run the Group 3 test on a Fast EtherLink PCI adapter,
follow these steps:
1
Start the Configuration and Diagnostic Program.
This program must be on the computer containing the
adapter you want to test.
2
Select Test Setup from the Test menu.
3
Select Group 3 from the Group Select box.
4
Enable the Group 3 test by highlighting the
<Enable Group> command button.
5
Highlight <OK> and press [Enter].
6
Go to the Run dialog box to start the tests.
Table 4-1
Adapter and Diagnostic Program Names (10 Mbps Adapter Only)
Diagnostic Program Name
Adapter
3C503
EtherLink II
â
or II TP
EtherLink II/16 or II/16 TP
3C505
EtherLink Plus
â
3C507
EtherLink 16 or EtherLink 16 TP
3C5X9CFG
EtherLink III family
3C523
EtherLink/MC
3C523TP
EtherLink/MC TP
3C527
EtherLink/MC 32
