HP 10/100 3Com 3C905B-TX Network Interface Card Installation Guide
Software Installation Procedure
12 English
2
Ensure that you have the correct
Client
and
Protocols
installed. You
may need to contact your MIS manager for this information.
3
Finally, double-click on each of your installed protocols and ensure
that your settings are correct for your PC’s connection to the LAN.
You may need to contact your MIS manager for this information.
Software Installation and Update on a Windows NT 4.0 System
Windows NT 4.0 Users
This section describes how to install the network driver in a PC running
Windows NT version 4.0 without the networking components installed.
You will need the following information from your MIS department:
•
Whether you are on a LAN or are connecting to one through a
modem
•
The protocol used in the Microsoft Windows Network (typically
TCP/IP or NetBEUI)
•
The name of the Windows NT server domain or workgroup you
belong to
•
Your IP address if you are using TCP/IP without DHCP
Installing the Driver from the
EtherDisk
®
diskettes
To install the network driver in a PC running Windows NT version 4.0:
1
Restart the PC and start Windows NT.
2
Double-click on the
My Computer
icon, then double-click on the
Control
Panel
icon.
3
In the
Control Panel
window, double-click on
Network
.
4
When prompted to install Windows NT Networking, click on
Yes
.
If you do not receive this prompt and the
Network
control panel
window appears, Windows NT Networking is already installed. You
will need to add the adapter manually: click on the
Adapter
tab, then
click on
Add...
and follow the instructions from step 7 onwards.
5
In the
Network Setup Wizard
window, select
Wired to the Network
and click
on
Next
.
3com.bk : 3com-us.fb4 Page 12 Monday, February 15, 1999 3:14 PM