3Com 3C886 - OfficeConnect 56K LAN Modem Router, Руководство пользователя

Страница: 78 / 116

78 C
HAPTER
7: P
LACING
, R
ECEIVING AND
D
ISCONNECTING
C
ALLS
Placing a Call Manually You can also choose to manually place a call to either an existing service provider
or to a destination that has not been defined.
To place a call manually to an existing service provider (that is, one that is already
configured), do the following.
1 From the 56K LAN Modem home page, click the Manual Calling button.
The Manual Call Control window appears.
2 In the table, locate the name of the service provider to which you wish to connect.
Verify that a call is not already connected to that or another destination by looking
under the
Status of Call column.
3 Click Place Call .
A message indicates that the call is being placed. The LAN Modem’s OH LED
illuminates green, indicating a call in progress. Once connected, the CD LED
illuminates, indicating a successful connection to the remote server. You may then
run any program appropriate for that location, such as ftp to transfer files or a
Web browser to access the Internet.
Placing a Call Manually
to a Temporary Service
Provider
To place a call manually to a service provider that has not been previously
configured, do the following. Note that for this type of manual call, the service
provider must supply a dynamic IP address.
This call profile will remain under TempSvcProvider until you change the settings
of these fields.
1 From the LAN Modem’s home page, click Manual Calling .
The Manual Call Control window appears.
2 In the table, locate TempSvcProvider .
3 Click Place Call .
4 Enter the telephone number of the destination in the Telephone Number field.
5 Enter your User ID for the remote destination.
6 Enter your Password for the remote destination.
7 Enter the DNS address if the remote destination does not automatically provide an
IP address. Otherwise, leave this field empty.
8 Click Make Call .
A message indicates that the call is being placed. The LAN Modem’s OH LED
illuminates green, indicating a call in progress. Once connected, the CD LED will
illuminate, indicating a successful connection. Once connected, you are ready to
run any desired application appropriate for that location, such as ftp to transfer
files, or you may enter a different URL in your Web browser to access the Internet.
Once a temporary call is established, other workstations may also connect to this
service provider by clicking
TempSvcProvider . Note that if multiple parties are
connected to TempSvcProvider , the call is disconnected as soon as one party hangs
up.