![background image](http://html1.mh-extra.com/html/3com/3c19504/3c19504_getting-started-manual_441343010.webp)
10
Serial Port 1
If you are using a dial up connection through a modem or a
Euro ISDN Terminal Adapter, use Serial Port 1 to connect the
Internet Server to your ISP.
1
If you have not already done so, install your modem fol-
lowing the instructions in the User Guide supplied with
it. Check that you can connect to your ISP.
2
Connect one end of the serial cable supplied with your
modem to Serial Port 1.
3
Connect the other end of the serial cable to the serial
port on your modem.
Connecting a Printer
The parallel printer port on the rear panel can be used to
connect any printer to the Internet Server using a standard
parallel printer cable. The Print Server can then be
configured to allow network users access to this printer.
■
For more information about configuring the Print Server,
see the
Internet Server User Guide
.
■
For information about installing and setting up your
printer, see your printer’s User Guide.
Powering on the Internet Server
Setting the Mains Voltage
CAUTION:
Before powering on the Internet Server for
the first time, ensure that the voltage selector is set to
operate correctly with your mains supply.
The Internet Server is shipped with the voltage set to 230V
AC by default. This is suitable for mains supply of 200 to
240V AC.
If your mains power supply provides 90 to 120V AC, you
must set the switch to 115V AC on the Internet Server.
Powering On
When you have made all the connections, power on the
Internet Server. When the Internet Server starts, it beeps
once. When it has initialized and is ready for use, you will
hear 2 short beeps; this takes about three minutes.
The Internet Server starts up with its default settings but
cannot be used until you have run the Client Wizard on the
System Administrator PC and the Internet Server Installation
Wizard.
Check that the link LEDs on both end of the LAN connec-
tion are lit (see the Internet Server back panel for the LAN
Link LED) and then continue the installation by running the
Client Wizard on the System Administrator PC.
Содержание 3C19504
Страница 4: ...4 ...