3Com 3C17700 - SuperStack 3 Switch 4900, Руководство по началу работы

Страница: 42 / 82

42 C
HAPTER
3: S
ETTING
U
P FOR
M
ANAGEMENT
■
no parity
■
1 stop bit
■
no hardware flow control
Refer to the documentation that accompanies the terminal emulation
software for more information.
Setting Up the Switch with IP Information
You are now ready to manually set up the Switch with IP information
using the command line interface.
1 The command line interface login sequence begins as soon as the Switch
detects a connection to its console port.
If the login prompt does not begin immediately, press Return a few times
until it starts.
2 At the login and password prompts, enter
admin
as your user name and
press Return at the password prompt. If you have logged on correctly, the
top-level menu of the command line interface is displayed as shown in
the example in
Figure 16 .
Figure 16 Example top-level command line interface menu
3 At the Select menu option prompt you can either:
■
enter the
protocol ip basicConfig
command. At the
Enter
configuration method
prompt enter
manual
. The screen
prompts you to enter IP information.
or
■
enter the
gettingStarted
command. At the
Enter
configuration method
prompt enter
manual
. The screen
prompts you to enter IP information.