3Com 3C16476BS-US - Baseline 2250 Plus Switch Скачать руководство пользователя страница 67 | Manualshive

Страница: 67 / 67

3Com 3C16476BS-US - Baseline 2250 Plus Switch Скачать руководство пользователя страница 67

R

EGULATORY

N

OTICES

FCC S

TATEMENT

This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in
a commercial environment. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference to radio communications, in which
case the user will be required to correct the interference at their own expense.

I

NFORMATION

TO

THE

U

SER

If this equipment does cause interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:

■

Reorient the receiving antenna.

■

Relocate the equipment with respect to the receiver.

■

Move the equipment away from the receiver.

■

Plug the equipment into a different outlet so that equipment and receiver are on
different branch circuits.

If necessary, the user should consult the dealer or an experienced radio/television
technician for additional suggestions. The user may find the following booklet prepared
by the Federal Communications Commission helpful:

How to Identify and Resolve Radio-TV Interference Problems

This booklet is available from the U.S. Government Printing Office, Washington,

DC 20402, Stock No. 004-000-00345-4.

In order to meet FCC emissions limits, this equipment must be used only with cables
which comply with IEEE 802.3.

CE S

TATEMENT

(E

UROPE

)

This product complies with the European Low Voltage Directive 73/23/EEC and EMC
Directive 89/336/EEC as amended by European Directive 93/68/EEC/.

CSA S

TATEMENT

This Class A digital apparatus meets all requirements of the Canadian
Interference-Causing Equipment Regulations.

Cet appareil numérique de la classe A respecte toutes les exigences du Règlement sur le
matériel brouilleur du Canada.

VCCI S

TATEMENT

«
...
65
66
67

Содержание 3C16476BS-US - Baseline 2250 Plus Switch




































































Отзывы:

Нет отзывов