Spectrometer
Copyright 3B ©2011
5
Manual Driver and Application installation
Application installation contains also driver installation, so you don’t need to install the driver
separately
. If you want to install all components, skip this chapter and go directly to ‘Application
Installation’ chapter.
To install the driver of Spectrometer device separately, follow the instructions below:
1.
Turn on the computer.
2.
Insert the provided software CD into CD-ROM drive.
3.
Go to the ‘customer/Camera/CameraDriver’ folder and run the exe file.
4.
Follow the on-screen instructions to continue the driver installation.
5.
Click ‘Finish’ to complete the installation and restart the system if needed.
6.
Connect the Spectrometer device to the USB port (if not already connected).
7.
Once the Spectrometer device is connected to the computer, the system will detect the new
USB device and configure the device automatically.
To install just the Spectrometer application (driver already installed/software upgrade), follow the
instructions below:
1.
Turn on the computer.
2.
Insert the provided software CD into CD-ROM drive.
3.
Go to the ‘customer’ folder and run the setup.exe.
4.
Follow the on-screen instructions to continue the application installation.
5.
Connect the Spectrometer device to the USB port (if not already connected).
6.
Once the Spectrometer device is connected to the computer, the system will detect the new
USB device and configure the device automatically.
