3B 1012793, Руководство пользователя

Страница: 6 / 48

®
English
6
BLS-Simulator BASIC
Billy™
2.2 Changing the lung bag
• Place the BASIC Billy ™ on a flat, even surface.
• Remove the face skin first of all by releasing the four attachments. To do this, pull down on the button
tabs on the skin at the designated points:
Magnets
• Do the same for the torso skin.
• Remove the jaw insert that is attached with magnets and take off the lung bag socket inside.
• Now, pick up one of the lung bags provided.
• Push the upper end of the lung bag (start of the simulated trachea) over the round opening of the lung
bag socket (make sure, that the lung bag alignes with the flat surface of the lung bag socket).
• Place the jaw insert on to the lung bag socket (the magnets will help to reconnect easily).
• Tilt the head back and reconnect the jaw insert (complete with lung bag and lung bag socket) with the
head. While bringing the head back to initial position, make sure to flatten the lung bag over the tho-
rax.
• Then attach the torso skin, followed by the face mask, with the button tabs (see above).
3 Cleaning and care
All parts that come into contact with the trainees breath, such as the face masks, jaw inserts and the
lung bag sockets can be disinfected with the disinfectant supplied.