INSTRUCTIONS 360 Y-DROP
ROGATOR
360YIELDCENTER.COM
3
ESTABLISH
DROP LOCATIONS
Figures 1 and 2
Step 1
Locate the center of the machine and
identify the location of all the drops. On
the sprayer boom, mark where each riser
mount will be located. This will ensure
that the extension tubes will not interfere
with the riser mounts.
Figure 3
Step 2
For the primary boom; starting at the
wing fold pivot pin, measure out and
make marks at 61", 131", 190", 256"
and 310" (all measurements are ±5").
Repeat for the other primary boom.
I.
Figure 1
Figure 2
Figure 3
310"
256"
190"
131"
61"
