360_VisionDome_Int_&_Ext_Inst_manual_V2.03_2006-03-14.doc Page 25 of 25
VisionDome Installation Manual
©360 Vision Technology Ltd Version 2.03
21.
Warranty & Safety Issues
Please read these notes before attempting to operate the 360 VisionDome
- Attention -
All servicing and repairs must be handled by 360 Vision Technology approved service
centres.
These products contain static electricity sensitive devices. Please take appropriate precautions
when handling to minimise static damage to the sensitive circuitry.
Please handle the VisionDome or Vision-
i
-Dome with care, as improper handling may cause
damage within this unit.
Avoid at all costs pointing the camera directly towards a bright light source (sunlight), or
expose the camera to intensive light situations as this may damage the camera pick-up device.
This information and/or any technical information - whether received verbally or in writing - is
given in good faith but without warranty and this also applies where proprietary rights of third
parties are involved. The information provided does not release you from your obligation to
check its validity and to test the products suitability for the intended purpose(s) and use(s).
The application, use and installation of the products either in isolation or in conjunction with
other products used, provided and or installed by you on the basis of the technical advice
issued by 360 Vision Technology Ltd are beyond our control and therefore remain entirely
your own responsibility. 360VISION products are sold in accordance with our General
Conditions of Sale and Delivery
ALL DESIGNS AND SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE
©360VISION 2006