manualshive.com logo in svg

360 Systems MAXX-2420-EX, Руководство по эксплуатации, Страница: 101 / 148

Поделиться
Скачать
360 Systems MAXX-2420-EX Скачать руководство пользователя страница 101

 

MAXX-2420-EX Owner’s Manual 

Page 101 

Hard Disk Management 

MAXX-2420-EX employs an advanced Serial-ATA controller that manages eight high-capacity 

hard disks operating in a RAID-5 configuration.  This design increases system performance, and by 
storing parity data, can survive the complete loss of a drive in the array without data loss. 

The MAXX-2420-EX brings a high level of reliability to Serial-ATA RAID through a switched 

architecture that exceeds the reliability of SCSI shared-bus storage systems.  The earlier shared-bus 
architecture of SCSI had inherent performance limitations due to arbitration latency, since only one 
drive may use the bus at a time.  Further, a single drive failure could bring the entire storage system 
down. 

By contrast, the MAXX-2420-EX uses a non-blocking switched architecture to isolate the drives 

from one another.  Any drive failure makes that drive unavailable and the rest of the storage system 
remains undisturbed.  In addition, the MAXX-2420-EX uses Advanced Data Protection features, 
where all drive commands are checked to ensure that no command corruption has taken place over 
the entire data path. 
Some of the MAXX-2420-EX’s RAID-5 implementation features and benefits include: 
 

 

•

 

Non-blocking switch technology with RAID-5 parity 

•

 

On-board processor minimizes host CPU overhead 

•

 

Easy-to-configure arrays  

•

 

Dynamic sector repair for robust data protection 

•

 

Accelerated RAID-5 writes 

•

 

Easy drive replacement from front panel 

Содержание MAXX-2420-EX





















































































































































Отзывы:

Нет отзывов