manualshive.com logo in svg

360 Systems DigiCart II Plus DR-2750, Руководство пользователя

Поделиться
Скачать
360 Systems DigiCart II Plus DR-2750 Скачать руководство пользователя страница 39

DigiCart/II Plus Owner's Manual

Operating Instructions  

  27

3.

 

To continue Record, press the 

Pause

 button again.  The button will go dark and

recording will resume.

NOTE: There’s no limit to the number of times the Pause button can be pressed during playback or
recording of a cut.  However, pressing PAUSE during fade in will cause the fade in to start over
when the PAUSE button is released.  Note that Pause during Record does not work when using
digital input.

Looping

Looping causes the currently selected cut to play continuously.  The current HEAD and TAIL
pointers will always determine the loop point for that cut.  (

i.e.

- The cut will play from HEAD to

TAIL continuously.)  To activate looping, press the 

LOOP

 button while the cut is playing.  The

LOOP

 button will illuminate.  Once looping is on, that cut will play continuously until looping is

turned off by one of the methods listed below.

Looping can be used with Playlists.  Looping can be turned on and off at any time without affecting
the Playlist.  While one cut is looping, you may use the

 SELECT

 control and press the 

PLAY

button to add additional cuts to the Playlist.  When you turn off looping, DigiCart/II Plus will
proceed with playback of the remaining cuts in the Playlist.

In the case of a Stack Mode Playlist, looping will operate without affecting the contents of the
stack.  If looping is turned off by pressing the 

LOOP

 button, the stack will continue playing

normally until completed.

Turning Loop On

1.

 

Press the 

LOOP

 button during play.

2.

 

The 

LOOP

 button will illuminate and the currently selected cut will play

continuously until looping is turned off.

Also, the 

PLAY

 button will blink to show that looping is active.

Turning Loop Off

1.

 

When the 

LOOP

 button is illuminated (indicating that LOOP is active), pressing

the 

LOOP

 button will turn looping off, but the currently looping cut or playlist will

play to completion.

2.

 

If there are no additional cuts selected in the playlist, the 

PLAY

 button will go

solid, indicating that playback will stop at the end of the current cut.  If other cuts
exist in the playlist, the 

PLAY

 button will continue to blink, indicating that

DigiCart/II Plus will continue playback of the remaining cuts in the playlist.

3.

 

Loop may also be turned off by pressing the 

STOP

 button once.  Pressing the

STOP

 button twice during Loop mode will immediately stop playback of the

current cut, and all other cuts in the playlist.

Содержание DigiCart II Plus DR-2750














































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды