manualshive.com logo in svg
background image

C02 quickly. Your tank

gets cold because the liq-

uid C02 inside is chang-

ing into gas to replace

the C02 used during

rapid firing. This change

from liquid to gas is

called a change of phase.

When you fire your gun (with a chilled tank), you are releasing

less C02 than if the tank was warm. 

Velocity Spikes: If you are shooting a regular (gas) C02 tank and

you point the gun downward, you will notice frost coming out

of your barrel. With some guns (Automag, Autococker, etc.) you

will quickly render your gun unusable if this happens. If liquid

C02 gets into your gun’s valve, you will usually get velocity

spikes. Let’s take a look at why this happens. The liquid and gas

C02 in your tank is always the exact same pressure because your

tank is a "closed system". The pressure in your gun’s valve will

also be the same pressure. The exception to this rule is if you are

using a pressure regulator on your gun. When liquid gets into

the gun valve, your velocity will spike because you are hitting

the paintball with more C02. In other words, the C02 in the

valve is of a much greater weight than if it were in a gaseous

state. 

2. C02 works fine for paintball guns, but if you’re looking for

high performance, you may want to look at purchasing a high

pressure system. 

About high pressure (nitrogen and compressed air) 

When someone refers to high pressure in regards to paintball,

they generally are speaking about nitrogen or compressed air.

For Paintball purposes both are

the same. A high pressure system can be filled with

either nitrogen from a bulk tank, or compressed air

from a compressor or a scuba tank that was filled

from a compressor. The reason these systems are

called high pressure systems is that they are filled (by

pressure, not by weight as with C02) to 3000 - 4500

600-800 psi outgoing pressure. This means that a

constant pressure flow to your gun can be safely

achieved.

The advantages of high pressure: Nitrogen and

compressed air have virtually the same

characteristics. Compressed air is the air that you

breath every day that is compressed into a higher

pressure than its normal state. Compressed air is

around 78% nitrogen and 21% oxygen. Under

normal conditions, nitrogen and compressed air are

unaffected by temperature changes and fluctuations.

Unlike C02 which boils at about 89 degrees

Fahrenheit, nitrogen boils at the very high

temperature of 196 degrees Celsius.

So for paintball, no matter how hot or cold it gets the

gun will be supplied with consistent pressure from the

regulated tank (assuming your equipment is working

properly). This means that your velocity will stay

much more consistent than you’ve come to expect

appealing to Paintball players than C02. Another

advantage with high pressure is that you do not have

you don’t have to chill the tank to fill it. To get a

complete fill however, you need to fill to 3000 psi,

wait a few minutes for the tank pressure to stabilize,

Содержание Rebel Xtreme










Отзывы: