Quick Start Guide Voyager Digital Intercom (ME-D-3G)
Ver 1.0
Controlling the device with an incoming Telephone Call
Users that are registered with the intercom can pulse the relay by simply making a no cost call to it.
1.
We must first Enable this mode of operation.
2.
To Enter Configuration Mode. Press A and then enter the default manager code “123456”.
3.
Press the D button twice to enter the Main menu.
4.
Press the D button to enter the Manager menu.
5.
Use the # button to move down to “Door Settings” and press the # button to move to “Caller ID
open”.
6.
Press the D button to enter this setting and then press it again to Enable/Disable this setting. Exit the
menus by pressing A 4 times.
Test the configuration:
7.
Place a call from the mobile number set up as a user in the last section (Setting up details for a User
or Apartment and make a call).
8.
The relay should pulse once call comes through and screen should display “door is opened”.
Controlling the device with an SMS Text
1.
The system can be controlled by sending SMS text from any mobile phone. For full details on this
see the included document on “GSM Door Phone SMS Control”. For example to add a user with one
phone number in location 2.
Purpose
Text to Send
Result
Add a new
Subscriber in
location 2 with one
phone number
xxxxxxxxx.
123456#20#2,Mary,xxxxxxxxx,0#
Note: xxxxxxxxxx this is the phone number of the
user we are placing in location 1
New Subscriber programmed
in location 2, with one phone
number added.
Keypad layout:
1
GHI
4
PQRS
7
↑
*
ABC
2
JKL
5
TUV
8
Space
0
DEF
3
MNO
6
WXYZ
9
↓
#
Menu/Exit
A
Delete
B
Shift
C
Select
D
