button. disk overwrite function can be set as on or off after pressing ENTER button. Use
UP or DOWN and ENTER to turn on or off the disk overwrite function. If it is set as ON,
First recorded area in HDD can be replaced with new recording data, when recording HDD
is full.
4) SYSTEM INFO
To show the system information including IP address, firmware version and disk capacity.
5) EVENT LOG
To enable or disable the Event Log function and also allows the user to view event logs.
6) FIRMWARE UPDATE
to Perform the firmware update function.
7) SETTING IMPORT/ EXPORT
To imports or export the system settings. Allows the saving of user preferences.
8) USER MANAGEMENT
When this function is enabled, the users must enter their login password before they enter
Menu for system setup.
Note: when the “User Manager” is opened, the “Advanced Menu” of upper menu will add
an “Account Password” option.
9) PRERECORD
When this function is enabled and active alarm or motion, built-in buffering memory will
store pre alarm image.
10) DVR NUMBER
Set the DVR number 000-999 when selecting a specific DVR unit among multiple DVRs.
For example, if the DVR number is set to 123, how to control the DVR No. 123 remotely.
Press the ‘Func” key on the remote control and press the numbers 1, 2, 3, in order. Then
press the “Enter” key to control the DVR selected.
32
