2N SIP Mic, Руководство пользователя, Страница: 16 / 68

2N® SIP Mic User Manual
16 / 68
•
•
•
•
•
•
•
IP Address Lookup
Do the following to find the 2N
®
SIP Mic IP address:
Connect 2N
®
SIP Mic to a power supply (or disconnect and reconnect it if already
supplied).
Wait for the sound signal .
Press the hang-up button on the device five times.
2N
®
SIP Mic signals the DHCP server state with a blue/green colour and reads its IP
address.
If the button is green, the address is 0.0.0.0, which means that
2N
®
SIP Mic has not
obtained the IP address from the DHCP server. Contact your network administrator or set
DHCP OFF and use the fixed IP address. See below.
To change the settings, switch off DHCP and switch on 2N
®
SIP Mic again.
Press the call end button 10 times within the first 10 s to switch the DHCP state from ON to
OFF and vice versa.
•
•
•
•
Change of the DHCP server status
Upon the system start, press the Call hangup button to read the IP address or change the
DHCP state.
Press the button five times to read the set IP address.
Press the button ten times to switch DHCP ON/OFF.
When you have pressed the button five times, the button turns blue/green to indicate
the DCHP setting.
Blue – DHCP OFF
Green – DHCP ON
