2N IP Video Kit, Руководство по установке

Страница: 48 / 66

2N TELEKOMUNIKACE a.s., www.2n.cz 48/66
3.1 Configuration
Configuration takes place typically via a Web interface. Alternatively, it is possible to
configure using the software or service . Configuration 2N Access Commander
®
My2N
via the web interface can be accessed as follows:
Launch your internet browser (Internet Explorer, Firefox, etc.).
Enter the IP address of your intercom ( , e.g.). http://192.168.1.100/
Log in using the username and password . Admin 2n
You have to know your intercom IP address to log in to the integrated web server.
Upon purchase, is set to the dynamic IP address mode – it retrieves the IP 2N IP Base
®
address automatically if there is a properly configured DHCP server in the LAN. If no
DHCP is available, operate in the static IP address mode (in default state 2N IP Base
®
adress http://192.168.1.100).
If you do not know the IP address of the device it is also possible to use the
which can find the , and 2N Network Scanner,
®
2N IP intercom 2N
®
Access Unit
in your network. You can find in section . 2N
®
IndoorTouch 3.6 Downloads
If your device remains inaccessible (you have forgotten the IP address, the network
configuration has changed, etc.), you can change the network configuration using the
device buttons.
Refer to the for the Configuration manual for 2N IP intercoms 2N IP Base
®
configuration details.